It is often said, as the economy goes up, so does the automotive and trucking industry. The reverse can also be true. The past four to five years have definitely proven this to be the case.
As the construction industry across the country in both residential and commercial was pummeled by the recession, the need for additional or replacement trucks in the medium-duty segments dropped as a result. New truck orders and subsequent sales became almost non-existent.
Within the Class 3-7 used market, no new sales meant very few trade-ins and eventually an extremely tight supply of two- to eight-year-old used trucks within the wholesale arena. Fortunately, the demand for new and used trucks was less than during traditional times.
Looking Back at the Past Decade
So, how have medium-duty Class 3-7 used-truck values been tracked over the past few years and even on a longer period, say, over the past nine to 10 years? From all of the data gathered and analyzed by Black Book in tracking used medium-duty trucks, the most popular age and length of in-service vehicles being traded is much longer than the car market.
Medium-duty trucks tend to stay in service longer and incur higher mileage before the initial trade-in or replacement process begins.
As a benchmark, Black Book focuses on the four- to 10-year-olds for consistency and better volumes.
Looking back over the past 10 years, the average used-truck price has shown an almost unbelievable increase in value. This has been driven by the need for a quality product, which generally has newer and better technology and improved durability with regard to service needs. And, more recently, the end-users hesitancy to commit to and purchase new, costlier units.
Looking back at the Jan. 1 average used values of four- to 11-year-old medium-duty trucks, the $9,305 average price dropped by almost 5 percent to a 10-year low of $8,796. For the next nine years, the average price increased all but one year, from 2009 to 2010 — the same period when the new sales levels bottomed out, and right amid the economic downturn.
That just-under 5-percent drop in value was only a slight blip in the value trends with significant value increases from January 2011 to January 2012, and, ultimately, into January 2013.
From 2004 through the present, there has been a more than 116-percent growth in a very short, economically challenged nine years. Used-truck demand and emissions-mandated new technology on the coming new models had the end user scrambling for good used product. (See Chart 1.)
Taking a look at the most recent two-year value pattern of change, when the dollar change was the greatest, the market wasn’t just a steady decline of value growth.
Some of the more noticeable increases in average value have shown up when the next newer model-year was added to the comparison table in August of each year. (See Chart 2.) The only real significant decline in more than two years was the time period from October 2012 to January 2013. Will this trend continue?
If history repeats itself, we will see a slight increase in values as we head into February. But, I wouldn’t bet the farm on this trend continuing, or at least not at this level.
The price of diesel fuel continues to be one of the greatest challenges and most looked-at factors within the costs of the trucking and construction industries. For all of 2012, the national average diesel price at the pump per gallon came in at $3.97, which was 13 cents higher than the 2011 average of $3.84.
The volatility throughout the past year ranged from a low of $3.65, with two separate periods at $4-plus per gallon on three occasions in March, April, and October. For all of 2012, the average price came in at $3.95, which was 11 cents above the 2011 average of $3.84.
With fuel price such an important factor in operating costs, the push to go “green” may be driven by factors other than lower CO2 emissions. There’s talk everywhere of liquefied and compressed natural gas (LNG and CNG), hybrids, and electric drivetrains. In the September/October 2012 issue of Work Truck, at least seven articles and/or advertisements openly mentioned LNG- or CNG-fueled engines.
Those affected by this fuel source are mostly small fleets running natural gas-powered vehicles (NGVs) and many have been doing so for several years. Many of these fleets are getting into this source of power by purchasing these units from the used market, often through GSA sales.
This allows fleet customers to take advantage of local, state, and federal tax credits and also utilize HOV lanes. When purchasing new, the additional $10,000-$12,000 takes a little more time to balance the ROI.
Range, along with a solid infrastructure for refueling, presents challenges that are also factors somewhat stalling the growth for electric (EVs) and plug-in hybrid-electric vehicles (PHEVs) within the automotive market.
Even with tax incentives on the automotive side, sales levels/penetration of hybrid-electric and pure electric vehicles are still struggling at a 3-percent level.
Within the medium-duty truck market, the percentage of NGVs is even less, with the majority of those fitting in the bus market or Class 3 models, but still gradually growing.
Within the overall medium-duty truck market, the best retention value always appears on the properly equipped models. Depending on the service needs, all new trucks are not equipped to fit a broad used-truck market. Currently, there is a better supply of some Class 6 box trucks that meet the new buyer’s usage needs, but due to floor and height construction of the box, the used market is more limited. These vehicles would sell much more quickly, and for a greater value, with just an extra cross member or two and an extra 12 to 18 inches of inside height.
Starting the New Year Off Positive
So, what is there to expect in market values and activity during the first half of 2013 within the medium-duty market?
Within the Black Book data, the primary drivers of market values are always supply and demand and the balance of the two.
Following the devastating damage caused by Hurricane Sandy in October 2012, the positive for the trucking and construction industry is that there is demand necessitated by this destruction. The potential for solid retention value due to this bump in demand is the best for this time period because of the volume of sales over the past four years. From more than 303,000 medium-duty truck sales seven years ago, to the bottom in sales of 128,000 in 2009, climbing steadily to an estimated 180,000 for 2012, the supply is tight enough with this short-term demand to hold values fairly stable. (See Chart 3.)
With the fiscal cliff aversion, encouraging signs of economic improvement, and more consumer and floor plan money available, the indicators are more positive than they’ve been in a long time. Over the past few years, many dealers have been running extra lean operations due to less business and future economic uncertainty. As signs of improvement arise, we could see more active efforts in acquiring used trucks, and in many cases, newer used trucks and equipment.
Black Book is constantly monitoring wholesale auctions and additional market activity. The electronic Internet suite, recently upgraded for the medium- and heavy-duty truck market, along with the handheld mobile products are user-friendly to provide the most informative market and value information.
What is the top maintenance-related factor to worry about when resale is on your mind? What should you avoid spending money on? What matters the most? Learn how to maintain your work trucks with resale in mind!
Originally posted on Work Truck Online
0 Comments
See all comments